Search found 3607 matches

by hugomez
Tue Sep 17, 2019 8:46 pm
Forum: Technical: Questions and Solutions
Topic: Carburator and ugly sound
Replies: 7
Views: 51

Re: Carburator and ugly sound

greasy-fingers wrote:
Tue Sep 17, 2019 4:38 pm
I have found that the older I get the more interest I have in similarly positioned trees :D
Hahahahaha :lol:
Ian Skinner wrote:
Tue Sep 17, 2019 7:18 pm
Hi Graham, don't say that, the surgery is most uncomfortable!!
Ian
Ouch!!! that sound painful :cry:
by hugomez
Tue Sep 17, 2019 11:47 am
Forum: Technical: Questions and Solutions
Topic: Carburator and ugly sound
Replies: 7
Views: 51

Re: Carburator and ugly sound

Hi Hugo, the first thing I would check is that the atomizer you have changed is a 2 stroke one, both the 2 and 4 stroke atomizers fit but your formi will not run correctly with the 4 stroke version, the 2 stroke ones are plain - the 4 stroke ones have some small holes drilled along the tube section...
by hugomez
Mon Sep 16, 2019 6:36 pm
Forum: Technical: Questions and Solutions
Topic: Carburator and ugly sound
Replies: 7
Views: 51

Re: Carburator and ugly sound

Hi again, I just check the bolts and nuts that tight the pipes to the muffler box, and one of the was much more loose that the other. however I would not say it was loose enough to let air coming out (and consequently a sound as a broken exhaust), however maybe I am wrong and that was the only silly...
by hugomez
Mon Sep 16, 2019 6:10 pm
Forum: Technical: Questions and Solutions
Topic: Carburator and ugly sound
Replies: 7
Views: 51

Carburator and ugly sound

Hi All, Yesterday I planned to have a ride in the Formichino Normale/Standard, so I decided to put all the settings in the UA15S carburetor as the factory recommend, because until that moment I had a different configuration on it. The reason why I decided to change it is because even if in the first...
by hugomez
Fri Sep 13, 2019 3:49 pm
Forum: Technical: Questions and Solutions
Topic: Dellorto MB 22A for Formichino Sport
Replies: 11
Views: 258

Re: Dellorto MB 22A for Formichino Sport

Maybe I am wrong but here I drop one idea. Perhaps your carburettor is all correct, and the problem is that your ignition timing is not 100% adjusted as it should, firing slightly early or slightly late as it should in one or both cylinders. May that be perhaps the cause that your have an unstable i...
by hugomez
Fri Sep 13, 2019 8:01 am
Forum: New member, welcome here!
Topic: A barn full of Rumis..
Replies: 11
Views: 154

Re: A barn full of Rumis..

Yes, I'm getting all the messages! :lol: It's a little overwhelming, but good. At the moment, all of our effort is going into getting the two Juniors running and ready for sale. After that (hopefully in the next couple of weeks) we'll be able to focus more on pricing parts and getting packets in th...
by hugomez
Thu Sep 12, 2019 1:54 pm
Forum: New member, welcome here!
Topic: A barn full of Rumis..
Replies: 11
Views: 154

Re: A barn full of Rumis..

Hi Yuri,

Any news about the twin throttle?

I wonder if you are receiving my emails.

Greets,
Hugo
by hugomez
Fri Sep 06, 2019 1:38 pm
Forum: Technical: Questions and Solutions
Topic: Wiring diagram for the Rumi Scoiattlo dynastart
Replies: 13
Views: 4126

Re: Wiring diagram for the Rumi Scoiattlo dynastart

Thank you Juan and Patrice,

If anybody want to download the high quality PDF file of this nice electric diagram, click at the next link: viewtopic.php?f=25&t=1703&p=11617#p11617

Greets,
Hugo
by hugomez
Fri Sep 06, 2019 1:36 pm
Forum: Tutorials, Diagrams and Drawings
Topic: 84 - Dynastar circuit electric Scoiattolo by Juan Nizio
Replies: 0
Views: 36

84 - Dynastar circuit electric Scoiattolo by Juan Nizio

Hi All, Juan Nizio in collaboration with Patrice Nougues made this very nice electric diagram for the Scoiattolo Dynastar. Thank you both for taking the time and effort doing this. Below you can see a miniature example of the document, but clicking at the link below you can download the high quality...
by hugomez
Thu Sep 05, 2019 9:42 pm
Forum: New member, welcome here!
Topic: A barn full of Rumis..
Replies: 11
Views: 154

Re: A barn full of Rumis..

Very impressive. :shock:

I've sent you an email interested in the twin throttle that is inside the wooden box.

Greets,
Hugo
by hugomez
Thu Sep 05, 2019 9:40 pm
Forum: Classified - Wanted & Sale
Topic: Wanted: Damper Rod retaining bolts
Replies: 3
Views: 81

Re: Wanted: Damper Rod retaining bolts

Hi Yuri,

This photo below was posted by Rudolf (Rumisti in the forum) in the year 2012 when helped me when I needed the same bolts and nuts. Maybe he still have some available and can help you with this, contact him.

Moto-Rumi-forks sliders-bolts-and-nuts.jpg
by hugomez
Thu Sep 05, 2019 3:47 pm
Forum: Cafe Rumi
Topic: Regolaritá Sei Giorni (Claudio - Argentina)
Replies: 98
Views: 24722

Re: Regolaritá Sei Giorni (Claudio - Argentina)

FANTASTIC!!!!!, congratulation Claudio!!! Finally is done!
by hugomez
Thu Sep 05, 2019 3:46 pm
Forum: New member, welcome here!
Topic: A barn full of Rumis..
Replies: 11
Views: 154

Re: A barn full of Rumis..

Hi Yuri,

Welcome to the forum.

Please add photos to the forum for us to see the parts and bikes, also together with prices for any interested member of this forum knows what we are talking about.

Looking forward to see those Rumi and parts.

Greets,
Hugo
by hugomez
Thu Sep 05, 2019 8:23 am
Forum: Cafe Rumi
Topic: Regolaritá Sei Giorni (Claudio - Argentina)
Replies: 98
Views: 24722

Re: Regolaritá Sei Giorni (Claudio - Argentina)

Impressive job Claudio!! congratulation.

I can imagine you are looking forward to have a proper ride on your beautiful Sei Giorni.
by hugomez
Sun Sep 01, 2019 3:33 pm
Forum: Technical: Questions and Solutions
Topic: Moto Rumi Sport - 1951 (Fixing some problems)
Replies: 28
Views: 682

Re: Moto Rumi Sport - 1951 (Fixing some problems)

Well, decision taken. I've mounted the Pirelli ML14 (2.25x21) at the back, with new spokes, and new bearings at the axle. Happy with the result, doesn't look too bad. Next will be the front wheel, doing the same on it. Moto-Rumi-Sport-21-inch-rear-tire-Pirelli-ML14_01.jpg Moto-Rumi-Sport-21-inch-rea...
by hugomez
Sat Aug 31, 2019 11:45 pm
Forum: Technical: Questions and Solutions
Topic: Moto Rumi Sport - 1951 (Fixing some problems)
Replies: 28
Views: 682

Re: Moto Rumi Sport - 1951 (Fixing some problems)

Hi, Today I finished the rear wheel lacing and truing adding new spokes on the 21inch rim that to my surprise ended much more straight that I was expecting. It is the first time I do a lacing and truing keeping an old rim instead replacing it to a brand new one. Soon I will start with the front whee...
by hugomez
Fri Aug 30, 2019 11:30 pm
Forum: Classified - Wanted & Sale
Topic: Rear light - "Aprilia Catalux" NOS for sale
Replies: 0
Views: 58

Rear light - "Aprilia Catalux" NOS for sale

Hi, Just came across on Ebay UK with this interesting New Old Stock Rear light "Aprilia Catalux" for sale. LINK: https://www.ebay.co.uk/itm/Taillight-APRILIA-Catalux-Ducati-BEVEL-175-Parillia-Gilera-Modial-1950s-NOS-OEM/223622569073 Aprilia-Catalux-01.jpg Aprilia-Catalux-02.jpg Aprilia-Catalux-03.jp...
by hugomez
Fri Aug 30, 2019 1:35 pm
Forum: Technical: Questions and Solutions
Topic: Dellorto MB 22A for Formichino Sport
Replies: 11
Views: 258

Re: Dellorto MB 22A for Formichino Sport

Hi,

Just in case, here I drop this information for you to review:

Rumi-Formichino-Sport-MB22-dellorto-tuning.jpg
Rumi-Formichino-Sport-MB22-dellorto-tuning.jpg (22.21 KiB) Viewed 186 times
by hugomez
Tue Aug 27, 2019 12:04 pm
Forum: Classified - Wanted & Sale
Topic: Spare tire carrier wanted
Replies: 12
Views: 1153

Re: Spare tire carrier wanted

Hi Jayhawks,

I just came across online with this spare tire carrier for sale. I right away thought about you.

LINK: https://www.leboncoin.fr/equipement_moto/1665667407.htm

Spare-tire-carrier-for-sale-01.jpg
Spare-tire-carrier-for-sale-02.jpg
Spare-tire-carrier-for-sale-03.jpg
by hugomez
Wed Aug 21, 2019 6:52 pm
Forum: Technical: Questions and Solutions
Topic: Moto Rumi Sport - 1951 (Fixing some problems)
Replies: 28
Views: 682

Re: Spokes for the 21inch wheel (Sport)

Hi Arthur,
Rudolf told me to buy 205mm x 3.0mm spokes, 45 degrees tip. I found 205mm x 2.9mm in 90 degrees tip, however as I did with the Bicarburatore, the tip can be easily bend to 45 degrees. I ordered two set of them, galvanize instead chrome, to don't break the chrome while I bend them.
by hugomez
Wed Aug 21, 2019 8:25 am
Forum: Technical: Questions and Solutions
Topic: Moto Rumi Sport - 1951 (Fixing some problems)
Replies: 28
Views: 682

Re: Spokes for the 21inch wheel (Sport)

Hi Arthur,

I contacted him already some days ago. He doesn't have anymore.
He used to have some of them when I visited him a few years ago, but at that time I was not interested in 21" tires, so I didn't buy, pity.
by hugomez
Tue Aug 20, 2019 12:25 pm
Forum: Other Motorcycle Brands
Topic: Rumi substituted by Maico on the derby 150
Replies: 2
Views: 113

Re: rumi substituted by maico on the derby 150

Beautiful Maico Graham, thanks for sharing these photos with us ;)
by hugomez
Tue Aug 20, 2019 10:15 am
Forum: Classified - Wanted & Sale
Topic: Wanted Fork bridge 1st series
Replies: 3
Views: 167

Re: Wanted Fork bridge 1st series

Hi Rudolf,

Maybe you can buy the top yoke from Martin, look what he is offering here: viewtopic.php?f=21&t=1696

Greets,
Hugo
by hugomez
Tue Aug 20, 2019 10:10 am
Forum: Technical: Questions and Solutions
Topic: Moto Rumi Sport - 1951 (Fixing some problems)
Replies: 28
Views: 682

Spokes for the 21inch wheel (Sport)

Hi all, Do you know which motorcycle spokes would fit the 21inch wheel of my Sport? The other day, after removing the old tire, I add some WD40 to all spokes nipple to afterward try to adjust them here and there to see if I could fix the rim that is not going very straight, however after playing a b...
by hugomez
Thu Aug 15, 2019 9:24 am
Forum: Classified - Wanted & Sale
Topic: 35 mm exhaust nuts!?
Replies: 8
Views: 238

Re: 35 mm exhaust nuts!?

Thank you Martin. Happy to help :D
by hugomez
Wed Aug 14, 2019 1:10 pm
Forum: Classified - Wanted & Sale
Topic: 35 mm exhaust nuts!?
Replies: 8
Views: 238

Re: 35 mm exhaust nuts!?

Hi! I got both a more or less complete scoiattolo and a spare one. On the more complete one I got a AVV (Electric start) motor. The exhaust nuts I have is 38 and fit the kick one, but not the cylinder/exhausts on the electric one. ...... :lol: :lol: Reading again your topic I realised that I misund...