Spare Tire Carrier Details

Moto Rumi technical problems or solutions
Post Reply
jayhawks
Posts: 41
Joined: Sun May 26, 2013 2:36 pm

Spare Tire Carrier Details

Post by jayhawks » Wed Mar 13, 2019 1:19 pm

I want to make a spare tire carrier for a Rumi Formichino. The carrier I want to make will carry the spare tire horizontally at the back of the scooter.
The questions I need to have answered are:

1. What is the diameter of the rod needed? 3/8", 1/2" or ?

2. How is the spare tire/wheel attached to the carrier? The photos I have seen show the carrier with the spare installed but do not show how it is
secured to the carrier.

3. How does the carrier attach to the scooter under the rear seat? Again, the photos I have seen do not show how it is accomplished.

If I could see photos of a carrier without the spare tire/wheel it would be very helpful.

Thanks for any help answering my ?'s.
Jayhawks

Moto-Rumi-Formichino-Spare-wheel-carrier-07.jpg
Moto-Rumi-Formichino-Spare-wheel-carrier-07.jpg (127.47 KiB) Viewed 134 times
Moto-Rumi-Formichino-Spare-wheel-carrier-08.jpg
Moto-Rumi-Formichino-Spare-wheel-carrier-08.jpg (122.9 KiB) Viewed 134 times

Post Reply