Contact

Moto Rumi technical problems or solutions
Post Reply
Elie
Posts: 35
Joined: Mon Jul 01, 2019 11:02 pm

Contact

Post by Elie » Thu Feb 13, 2020 3:30 pm

hello all forum users a happy 2020, have a question, does anyone have a clear diagram for the connection of the electrical contact on the wheel of rumi, the contact is the original contact thank you

UHJ200
Posts: 522
Joined: Mon Aug 17, 2009 1:37 pm

Re: Contact

Post by UHJ200 » Fri Feb 14, 2020 12:19 am

If you mean the flywheel generator then there is plenty of detail in the "downloads" section of the forum.

One additional point, equal angular opening of the contact breakers is more important than the fully open gap setting. The more equal the better of course but an equal ignition angle on both cylinders will result in smoother running.

Elie
Posts: 35
Joined: Mon Jul 01, 2019 11:02 pm

Re: Contact

Post by Elie » Fri Feb 14, 2020 3:03 pm

no it is about the selector switch (control of the lights and clacson etc) that is mounted on the handlebars

arthur lewthwaite
Posts: 639
Joined: Fri Dec 28, 2012 7:03 pm

Re: Contact

Post by arthur lewthwaite » Fri Feb 14, 2020 3:55 pm

hello ellie there is a wiring diagram on the moto rumi club uk site,,look on their technical section and click on wiring.hope this helps ,regards arthur.

hugomez
Site Admin
Posts: 3651
Joined: Thu Jun 11, 2009 10:05 am
Location: Amsterdam
Contact:

Re: Contact

Post by hugomez » Sun Feb 16, 2020 6:04 am

Using the search tool of the forum (Right side of the page), type wiring diagram and you will get many topics of the forum talking about it.

I did it for you and you get 45 results, see here: https://www.formichino.com/forum/search ... ng+diagram

In addition to that, you also has this:

https://www.formichino.com/forum/viewto ... f=25&t=717

https://www.formichino.com/forum/viewto ... f=25&t=849
My little Formichino here: http://www.formichino.com/pictures1.html

Ian Skinner
Posts: 536
Joined: Mon Aug 24, 2009 12:36 pm
Location: South Wales UK

Re: Contact

Post by Ian Skinner » Tue Feb 18, 2020 10:00 am


Elie
Posts: 35
Joined: Mon Jul 01, 2019 11:02 pm

Re: Contact

Post by Elie » Tue Feb 18, 2020 11:22 pm

Thanks :D

Post Reply